Configuring A Citrix Listed Application Resource Profile (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide
Related
Documentation

Configuring a Citrix Listed Application Resource Profile (NSM Procedure)

104
Table 23: Citrix Terminal Services (Default ICA) Configuration
Details (continued)
Option
Roles Selections
Configuring a Citrix Listed Application Resource Profile (NSM Procedure) on page 104
Configuring Custom Web Applications Resource Profile (NSM Procedure) on page 112
Configuring a Citrix Terminal Services (Custom ICA) Resource Profile (NSM Procedure)
on page 95
Citrix created published applications to satisfy the need for security. It is dangerous to
allow any executable to be run on the server. With published applications, only
applications that are allowed to be run are published.
With the Secure Access device, these published applications are displayed on the Secure
Access device index page as terminal services bookmarks.
To configure a Citrix listed application resource profile:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
a Citrix listed application resource profile.
Click the Configuration tab, and select Users > Resource Profiles > Terminal Services.
2.
The corresponding workspace appears.
Click the New button and the New dialog box appears.
3.
Add or modify settings as specified in Table 24 on page 104.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 24: Citrix Listed Application Resource Profile Configuration Details
Option
Settings tab
Name
Function
Specifies the roles to which the
resource profile applies.
NOTE: The Role Selections tab
is enabled only when you select
the Subset of Terminal Service
Profile roles check box from the
Applies to roles drop–down list.
Function
Specifies a unique name for the
resource profile.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Select the role, and then click
Add.
Your Action
Enter the name.