Aggregated-Ether-Options - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

Network interfaces configuration
Table of Contents

Advertisement

aggregated-ether-options

aggregated-ether-options {
Syntax
}
Hierarchy Level
[edit interfaces aex]
ethernet-switch-profile {
ethernet-policer-profile {
input-priority-map {
ieee802.1p premium [ values ];
}
output-priority-map {
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
}
(mac-learn-enable | no-mac-learn-enable);
}
(flow-control | no-flow-control);
lacp {
(active | passive);
link-protection {
disable;
(revertive | non-revertive);
periodic interval;
system-priority priority;
}
link-protection;
link-speed speed;
(loopback | no-loopback);
minimum-links number;
source-address-filter {
mac-address;
(source-filtering | no-source-filtering);
}
Chapter 62: Summary of Interface Configuration Statements
aggregated-ether-options
969

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos 10.1

Table of Contents