Activation-Priority - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

activation-priority

activation-priority priority;
Syntax
Hierarchy Level [edit interfaces interface-name unit logical-unit-number dynamic-call-admission-control],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
Statement introduced in JUNOS Release 8.2.
Release Information
(J4350 and J6350 Services Routers supporting voice over IP with the TGM550 media
Description
gateway module) For Fast Ethernet and Gigabit Ethernet interfaces, ISDN BRI
interfaces, and serial interfaces with PPP or Frame Relay encapsulation, configure
the dynamic call admission control (dynamic CAC) activation priority value.
priority
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
dynamic-call-admission-control]
—The activation priority in which the interface is used for providing call
bandwidth. The interface with the highest activation priority value is used as the
primary link for providing call bandwidth. If the primary link becomes unavailable,
the TGM550 switches over to the next active interface with the highest activation
priority value, and so on.
Range: 0 through 255
Default: 50
Configuring Dynamic Call Admission Control on page 177
JUNOS Services Interfaces Configuration Guide
JUNOS Software Interfaces and Routing Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
activation-priority
961