Gigether-Options - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

gigether-options

gigether-options {
Syntax
802.3ad {
aex (primary | backup);
lacp {
port-priority;
}
}
(asynchronous-notification | no-asynchronous-notification);
(auto-negotiation | no-auto-negotiation) remote-fault <local-interface-online |
local-interface-offline>;
(flow-control | no-flow-control);
ignore-l3-incompletes;
(loopback | no-loopback);
mpls {
pop-all-labels {
required-depth number;
}
}
no-auto-mdix
source-address-filter {
mac-address;
}
(source-filtering | no-source-filtering);
speed
ethernet-switch-profile {
(mac-learn-enable | no-mac-learn-enable);
tag-protocol-id [ tpids ];
ethernet-policer-profile {
input-priority-map {
ieee802.1p premium [ values ];
}
output-priority-map {
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
}
Chapter 62: Summary of Interface Configuration Statements
gigether-options
1143