Clear-Dont-Fragment-Bit; Client - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

clear-dont-fragment-bit

clear-dont-fragment-bit;
Syntax
[edit interfaces interface-name unit logical-unit-number],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Release Information
Clear the don t-fragment (DF) bit on all IP version 4 (IPv4) packets entering a generic
Description
routing encapsulation (GRE) tunnel. If the encapsulated packet s size exceeds the
tunnel s maximum transmission unit (MTU), the packet is fragmented before
encapsulation.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

client

Syntax client;
Hierarchy Level [edit interfaces pp0 unit logical-unit-number pppoe-options],
[edit logical-systems logical-system-name interfaces pp0 unit logical-unit-number
Statement introduced in JUNOS Release 8.5.
Release Information
On J Series Services Routers, configure the router to operate in the PPPoE client
Description
mode.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1024
clear-dont-fragment-bit
JUNOS Services Interfaces Configuration Guide
pppoe-options]
Configuring the PPPoE Client Mode on page 834