Continuity-Check - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

continuity-check

continuity-check {
Syntax
}
Hierarchy Level [edit protocols oam ethernet connectivity-fault-management maintenance-domain
Statement introduced in JUNOS Release 8.4.
Release Information
Specify continuity check protocol options.
Description
hold-interval minutes
Options
interval (10m | 10s | 1m | 1s| 100ms | 10ms)
loss-threshold minutes
interface-status-tlv
port-status-tlv
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1038
continuity-check
hold-interval minutes;
interval (10m | 10s | 1m | 1s| 100ms | 10ms);
loss-threshold number;
interface-status-tlv;
port-status-tlv;
domain-name maintenance-association ma-name]
—Specify the continuity check hold-interval, in minutes.
—Specify the loss-threshold, in minutes.
—Enable interface-status-tlv transmission.
—Enable port-status-tlv transmission.
Continuity Check Protocol on page 708
Example: Configuring Connectivity Fault Management for a PBB Network on MX
Series Routers
—Specify the continuity check interval.