Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 676

JUNOS 10.1 Network Interfaces Configuration Guide
To configure Gigabit Ethernet IQ-specific physical interface properties, include the
gigether-options
statements are supported on 10-Gigabit Ethernet IQ2 and IQ2-E PIC. Some of these
statements are also supported on Gigabit Ethernet PICs with small form-factor
pluggable transceivers (SFPs) (except the 10-port Gigabit Ethernet PIC and the built-in
Gigabit Ethernet port on the M7i router). For more information, see "Example:
Configuring Gigabit Ethernet Interfaces" on page 865.
To configure 10-Gigabit Ethernet IQ2 and IQ2-E-specific physical interface properties,
include the
hierarchy level. For more information, see "10-Gigabit Ethernet Framing Overview"
on page 817.
606
Configuring Ethernet Physical Interface Properties
statement at the
[edit interfaces ge-fpc/pic/port]
flexible-vlan-tagging;
gigether-options {
802.3ad aex (primary | backup);
auto-negotiation | no-auto-negotiation) remote-fault <local-interface-online |
local-interface-offline>;
(flow-control | no-flow-control);
ignore-l3-incompletes;
(loopback | no-loopback);
(source-filtering | no-source-filtering);
ethernet-switch-profile {
(mac-learn-enable | no-mac-learn-enable);
tag-protocol-id [tpids ];
ethernet-policer-profile {
input-priority-map {
ieee802.1p premium [values ];
}
output-priority-map {
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
}
}
native-vlan-id number;
}
lan-phy or wan-phy
[edit interfaces]
[edit interfaces ge-fpc/pic/port]
statement at the [edit interfaces xe-fpc/pic/port framing]
hierarchy level. These