Ignore-All; Ignore-L3-Incompletes - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

ignore-all

ignore-all;
Syntax
[edit interfaces interface-name serial-options dce-options],
Hierarchy Level
[edit interfaces interface-name serial-options dte-options]
Statement introduced before JUNOS Release 7.4.
Release Information
Ignore all control leads. You can include the
Description
only if you do not explicitly enable other signal handling options at the
hierarchy level.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

ignore-l3-incompletes

ignore-l3-incompletes;
Syntax
[edit interfaces interface-name fastether-options],
Hierarchy Level
[edit interfaces interface-name gigether-options]
Statement introduced in JUNOS Release 9.0.
Release Information
Ignore the counting of Layer 3 incomplete errors on Fast Ethernet, Gigabit Ethernet,
Description
and 10-Gigabit Ethernet interfaces.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
Configuring the Serial Signal Handling on page 278
Ignoring Layer 3 Incomplete Errors on page 613
Chapter 62: Summary of Interface Configuration Statements
statement in the configuration
ignore-all
dte-options
1163
ignore-all