Filter - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

filter

filter {
Syntax
}
[edit interfaces interface-name unit logical-unit-number family family],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
Statement introduced before JUNOS Release 7.4.
Release Information
Apply a filter to an interface. You can also use filters for encrypted traffic. When you
Description
configure filters, you can configure the family
Options group filter-group-number
input filter-name
output filter-name
The remaining statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
family family]
—Define an interface to be part of a filter group. The default
filter group number is 0.
Range: 0 through 255
—Name of one filter to evaluate when packets are received on the
interface.
—Name of one filter to evaluate when packets are transmitted on
the interface.
Applying a Filter to an Interface on page 210
JUNOS Services Interfaces Configuration Guide
JUNOS Policy Framework Configuration Guide
JUNOS System Basics Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
, ,
inet inet6 mpls
, or only.
vpls
1129
filter