Table 54: Subrate Values For T3 Digital Link Compatibility Mode - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

A subrate value of 1 corresponds to 44.2 / 14, which is 3.16 Mbps, 7.15 percent
of the HDLC-encapsulated payload.
For Verilink CSUs, specify the subrate as a number from 1 through 28 that exactly
matches the value configured on the CSU. To calculate the maximum allowable
peak rate, multiply the configured subrate by 1.578 Mbps. For example, a subrate
value of 28 corresponds to 28 x 1.578 Mbps, which is 44.2 Mbps, 100 percent
of the HDLC-encapsulated payload. A subrate value of 1 corresponds to 1.578
Mbps, 3.57 percent of the HDLC-encapsulated payload. A subrate value of 20
corresponds to 20 x 1.578 Mbps, which is 31.56 Mbps, 71.42 percent of the
HDLC-encapsulated payload.
NOTE: Verilink configuration is not functional if an IQ interface is paired with an IQE
interface.

Table 54: Subrate Values for T3 Digital Link Compatibility Mode

301 Kbps 9.3 Mbps
601 Kbps 9.6 Mbps
902 Kbps 9.9 Mbps
1.2 Mbps 10.2 Mbps
1.5 Mbps 10.5 Mbps
1.8 Mbps 10.8 Mbps
2.1 Mbps 11.1 Mbps
2.4 Mbps 11.4 Mbps
2.7 Mbps 11.7 Mbps
3.0 Mbps 12.0 Mbps
3.3 Mbps 12.3 Mbps
3.6 Mbps 12.6 Mbps
3.9 Mbps 12.9 Mbps
4.2 Mbps 13.2 Mbps
4.5 Mbps 13.5 Mbps
4.8 Mbps 13.8 Mbps
5.1 Mbps 14.1 Mbps
5.4 Mbps 14.4 Mbps
Chapter 32: Configuring T3 Interfaces
18.3 Mbps 27.4 Mbps
18.6 Mbps 27.7 Mbps
18.9 Mbps 28.0 Mbps
19.2 Mbps 28.3 Mbps
19.5 Mbps 28.6 Mbps
19.8 Mbps 28.9 Mbps
20.1 Mbps 29.2 Mbps
20.5 Mbps 29.5 Mbps
20.8 Mbps 29.8 Mbps
21.1 Mbps 30.1 Mbps
21.4 Mbps 30.4 Mbps
21.7 Mbps 30.7 Mbps
22.0 Mbps 31.0 Mbps
22.3 Mbps 31.3 Mbps
22.6 Mbps 31.6 Mbps
22.9 Mbps 31.9 Mbps
23.2 Mbps 32.2 Mbps
23.5 Mbps 32.5 Mbps
Configuring the T3 CSU Compatibility Mode
36.4 Mbps
36.7 Mbps
37.0 Mbps
37.3 Mbps
37.6 Mbps
37.9 Mbps
38.2 Mbps
38.5 Mbps
38.8 Mbps
39.1 Mbps
39.4 Mbps
39.7 Mbps
40.0 Mbps
40.3 Mbps
40.6 Mbps
40.9 Mbps
41.2 Mbps
41.5 Mbps
591