Table of Contents
Advertisement
On a T Series, TX Matrix router with SONET interfaces, the valid range for
minimum-links number
specified, all configured links of a bundle must be up for the bundle to be labeled
up
On all other router routers, the range of valid values for
through 8 and the maximum number of links supported in an aggregate is eight.
When the maximum value (8) is specified, all configured links of a bundle must be
up for the bundle to be labeled
Configuring Filters or Sampling on Aggregated SONET/SDH Links
To set up firewall filters or sampling on aggregated SONET/SDH interfaces, you must
configure the
manner as on other interfaces.
To configure a filter, include the
You can include this statement at the following hierarchy levels:
You must also configure separate statements that define the properties of the filter.
For more information, see the JUNOS Policy Framework Configuration Guide and
"Examples: Configuring Filters or Sampling on Aggregated SONET/SDH Links" on
page 939.
Examples: Configuring Filters or Sampling on Aggregated SONET/SDH
Links
Configure filtering on aggregated SONET/SDH interfaces:
Defining the Filter
is from 1 through 16. When the maximum value (16) is
.
interface with these properties. The filters function in the same
asx
filter {
input input-filter-name;
output output-filter-name;
}
[edit interfaces as x unit logical-unit-number]
[edit logical-systems logical-system-name interfaces asx unit logical-unit-number]
[edit interfaces]
asx {
unit 0 {
family inet {
address 10.2.11.1/30;
filter {
input input-filter-name;
output output-filter-name;
}
}
}
}
[edit firewall]
filter input-filter-name {
Chapter 61: Configuring SONET/SDH Interfaces
minimum-links number
up
.
statement:
filter
Configuring Aggregated SONET/SDH Interfaces
is 1
939
Advertisement
Table of Contents
