Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1168

JUNOS 10.1 Network Interfaces Configuration Guide
encapsulation (Logical Interface)
Syntax encapsulation (atm-ccc-cell-relay | atm-ccc-vc-mux | atm-cisco-nlpid | atm-tcc-vc-mux |
Hierarchy Level [edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Release Information
Logical link-layer encapsulation type.
Description
atm-ccc-cell-relay
Options
atm-ccc-vc-mux
atm-cisco-nlpid
atm-mlppp-llc
atm-nlpid
atm-ppp-llc
atm-ppp-vc-mux
atm-snap
atm-tcc-snap
atm-tcc-vc-mux
atm-vc-mux
1098
encapsulation (Logical Interface)
atm-mlppp-llc | atm-nlpid | atm-ppp-llc | atm-ppp-vc-mux | atm-snap | atm-tcc-snap |
atm-vc-mux | ether-over-atm-llc | ether-vpls-over-atm-llc | ether-vpls-over-fr |
ether-vpls-over-ppp | ethernet | frame-relay-ccc | frame-relay-ppp | frame-relay-tcc |
frame-relay-ether-type | frame-relay-ether-type-tcc | multilink-frame-relay-end-to-end |
multilink-ppp | ppp-over-ether | ppp-over-ether-over-atm-llc | vlan-bridge | vlan-ccc |
vlan-vci-ccc | vlan-tcc | vlan-vpls);
—Use ATM cell-relay encapsulation.
—Use ATM virtual circuit (VC) multiplex encapsulation on CCC circuits.
When you use this encapsulation type, you can configure the
—Use Cisco ATM network layer protocol ID (NLPID) encapsulation.
When you use this encapsulation type, you can configure the
—For ATM2 IQ interfaces only, use Multilink PPP (MLPPP) over AAL5
LLC. For this encapsulation type, your router must be equipped with a Link
Services or Voice Services PIC. MLPPP over ATM encapsulation is not supported
on ATM2 IQ OC48 interfaces.
—Use ATM NLPID encapsulation. When you use this encapsulation type,
you can configure the inet
—For ATM2 IQ interfaces only, use PPP over AAL5 LLC encapsulation.
—For ATM2 IQ interfaces only, use PPP over ATM AAL5 multiplex
encapsulation.
—Use ATM subnetwork attachment point (SNAP) encapsulation.
—Use ATM SNAP encapsulation on translational cross-connect (TCC)
circuits.
—Use ATM VC multiplex encapsulation on TCC circuits. When you use
this encapsulation type, you can configure the
—Use ATM VC multiplex encapsulation. When you use this encapsulation
type, you can configure the
family only.
tcc family only.
inet family only.
ccc family only.
inet family only.