Allow-Any-Vci - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
alarm
alarm low light alarm {
Syntax
}
Hierarchy Level [edit interfaces interface-name optics-options]
Statement introduced in JUNOS Release 10.0.
Release Information
Specify the action to take if the receiving optics signal is below the optics low light
Description
alarm threshold.
Options link-down
syslog
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

allow-any-vci

Syntax allow-any-vci;
Hierarchy Level [edit interfaces interface-name unit 0],
[edit logical-systems logical-system-name interfaces interface-name unit 0]
Statement introduced before JUNOS Release 7.4.
Release Information
Dedicate entire ATM device to ATM cell relay circuit.
Description
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
972
alarm
(link-down | syslog);
—Drops the 10-Gigabit Ethernet link and marks link as down.
—Writes the optics information to the system log.
Configuring 10-Gigabit Ethernet Link Down Notification for Optics Options Alarm
or Warning on page 821
Configuring an ATM1 Cell-Relay Circuit on page 340