Table of Contents
Advertisement
dlci
dlci dlci-identifier;
Syntax
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Release Information
For Frame Relay and Multilink Frame Relay (MLFR) user-to-network interface (UNI)
Description
network-to-network interface (NNI) encapsulation only, and for link services, voice
services and point-to-point interfaces only, configure the data-link connection identifier
(DLCI) for a permanent virtual circuit (PVC) or an switched virtual circuit (SVC).
To configure a DLCI for a point-to-multipoint interface, use the multipoint-destination
statement to specify the DLCI.
Options
dlci-identifier
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
—Data-link connection identifier.
Range: 16 through 1022. For Frame Relay DLCI ranges for channelized interfaces,
see "Data-Link Connection Identifiers on Channelized Interfaces" on page 396.
Configuring Frame Relay DLCIs on page 388
JUNOS Services Interfaces Configuration Guide
encapsulation (Logical Interface) on page 1098
multicast-dlci on page 1277
multipoint-destination on page 1282
Chapter 62: Summary of Interface Configuration Statements
1075
dlci
Advertisement
Table of Contents
