Default-Chap-Secret - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

default-chap-secret

default-chap-secret name;
Syntax
Hierarchy Level [edit interfaces interface-name ppp-options chap],
[edit interfaces interface-name unit logical-unit-number ppp-options chap],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
Statement introduced in JUNOS Release 8.0.
Release Information
Define the default CHAP secret to be used when no matching CHAP access profile
Description
exists.
For ATM2 IQ interfaces only, you can configure a default CHAP secret on the logical
interface unit if the logical interface is configured with one of the following PPP over
ATM encapsulation types:
If you do not include the
Default
interface receives a CHAP challenge or response from a peer that is not in the applied
access profile, the link is immediately dropped.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
ppp-options chap]
—PPP over AAL5 LLC encapsulation.
atm-ppp-llc
—PPP over AAL5 multiplex encapsulation.
atm-ppp-vc-mux
default-chap-secret
Configuring a Default CHAP Secret on page 125
access-profile on page 949
Chapter 62: Summary of Interface Configuration Statements
statement in the configuration, and an
default-chap-secret
1053