Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1178

JUNOS 10.1 Network Interfaces Configuration Guide
epd-threshold (Physical Interface)
Syntax epd-threshold cells plp1 cells;
Hierarchy Level [edit interfaces at-fpc/pic/port atm-options scheduler-maps map-name forwarding-class
Statement introduced before JUNOS Release 7.4.
Release Information
For ATM2 IQ interfaces only, define the EPD threshold on a VC. The EPD threshold
Description
is a limit on the number of transmit packets that can be queued. Packets that exceed
the limit are discarded.
If you do not include either the
Default
forwarding class configuration, the JUNOS Software uses an EPD threshold based on
the available bandwidth and other parameters.
Options cells
The
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1108
epd-threshold (Physical Interface)
class-name]
—Maximum number of cells.
Range: For 1-port and 2-port OC12 interfaces, 48 through 425,984 cells. For
1-port OC48 interfaces, 48 through 425,984 cells. For 2-port OC3, DS3, and E3
interfaces, 48 through 212,992 cells. For 4-port DS3 and E3 interfaces, 48 through
106,496 cells.
statement is explained separately.
plp1
Configuring an ATM Scheduler Map on page 349
linear-red-profile on page 1219
epd-threshold or the linear-red-profile statement in the