Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1077

buildout (T1 Interfaces)
Syntax buildout value;
Hierarchy Level [edit interfaces ct1-fpc/pic/port]
[edit interfaces interface-name t1-options]
Statement introduced before JUNOS Release 7.4.
Release Information
For T1 interfaces, set the buildout value.
Description
NOTE: When configuring CT1 interfaces on 10-port Channelized E1/T1 IQE PICs, the
buildout
The default buildout value is 0 through 132 feet.
Default
You can set the buildout value to one of the following:
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
statement must be included at the hierarchy level.
0-132 —0 through 132 feet (0 through 40 meters)
—133 through 265 feet (40 through 81 meters)
133-265
266-398 —266 through 398 feet (81 through 121 meters)
—399 through 531 feet (121 through 162 meters)
399-531
532-655 —532 through 655 feet (162 through 200 meters)
—For J Series routers only, long buildout with 0 decibel (dB) transmit
long-0db
attenuation
—For J Series routers only, long buildout with 7.5 dB transmit
long-7.5db
attenuation
long-15db —For J Series routers only, long buildout with 15 dB transmit attenuation
—For J Series routers only, long buildout with 22.5 dB transmit
long-22.5db
attenuation
Configuring the T1 Buildout on page 579
JUNOS Software Interfaces and Routing Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
buildout (T1 Interfaces)
1007