Table 49: Ima Group Defects With Ima Standard Requirement Numbers; Table 50: Ima Link Alarms With Ima Standard Requirement Numbers - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
Table 48: IMA Group Alarms with IMA Standard Requirement Numbers (continued)
Alarm
Insufficient-Links
Insufficient-Links-FE
Blocked-FE
GR-Timing-Mismatch
Table 49 on page 548 shows the supported IMA group defects and their associated
IMA standard requirement numbers.

Table 49: IMA Group Defects with IMA Standard Requirement Numbers

Defects
Start-up-FE
Config-Aborted
Config-Aborted-FE
Insufficient-Links
Insufficient-Links-FE
Blocked-FE
GR-Timing-Mismatch
IMA Link Alarms and Link Defects
Table 50 on page 548 shows the supported IMA link alarms and their associated IMA
standard requirement numbers.

Table 50: IMA Link Alarms with IMA Standard Requirement Numbers

Alarm
LIF
LODS
RFI-IMA
Tx-Mis-Connected
Rx-Mis-Connected
548
ATM IMA Configuration Overview
IMA Standard Requirement
Number
R-138
R-139
R-140
R-141
R-142
IMA Standard Requirement Number
R-148
R-149
R-150
R-151
IMA Standard Requirement Number
R-145
R-146
R-147
R-148
R-149
R-150
R-151
Description
Loss of IMA frame
Link out of delay synchronization
Remote defect/failure
Transmit misconnected
Receive misconnected