high-plp-threshold
high-plp-threshold percent;
Syntax
Hierarchy Level
[edit interfaces at-fpc/pic/port atm-options linear-red-profiles profile-name]
Statement introduced before JUNOS Release 7.4.
Release Information
For ATM2 IQ interfaces only, define CoS VC drop profile fill-level percentage when
Description
linear RED is applied to cells with high PLP. When the fill level exceeds the defined
percentage, packets with high PLP are randomly dropped by RED. This statement
is mandatory.
Options
percent
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
—Fill-level percentage when linear RED is applied to cells with PLP.
Configuring ATM2 IQ VC Tunnel CoS Components on page 347
high-plp-max-threshold on page 1150
low-plp-max-threshold on page 1252
low-plp-threshold on page 1253
queue-depth on page 1374
Chapter 62: Summary of Interface Configuration Statements
high-plp-threshold
1151