Binding A Range Of Vlan Ids To A Logical Interface; Binding A Range Of Vlan Ids To A Single-Tag Logical Interface; Binding A Range Of Vlan Ids To A Dual-Tag Logical Interface - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
You can include the statement at the following hierarchy levels:
To configure an Ethernet interface to support dual-tag logical interfaces, include the
stacked-vlan-tagging
level. To support mixed tagging, include the

Binding a Range of VLAN IDs to a Logical Interface

A VLAN range can be used by service providers to interconnect multiple VLANs
belonging to a particular customer over multiple sites. Using a VLAN ID range
conserves switch resources and simplifies configuration.

Binding a Range of VLAN IDs to a Single-Tag Logical Interface

To bind a range of VLAN IDs to a single-tag logical interface, include the
statement:
You can include the statement at the following hierarchy levels:
To configure an Ethernet interface to support single-tag logical interfaces, include
the
level. To support mixed tagging, include the

Binding a Range of VLAN IDs to a Dual-Tag Logical Interface

To bind a range of VLAN IDs to a dual-tag logical interface, include the
statement. Use the
separating the starting VLAN ID and ending VLAN ID with a hyphen.
You can include the statement at the following hierarchy levels:
To configure an Ethernet interface to support dual-tag logical interfaces, include the
stacked-vlan-tagging
level. To support mixed tagging, include the
626
Binding VLAN IDs to Logical Interfaces
[edit interfaces ethernet-interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces ethernet-interface-name unit
logical-unit-number]
statement at the
vlan-id-range vlan-id-vlan-id;
[edit interfaces ethernet-interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces ethernet-interface-name unit
logical-unit-number]
vlan-tagging statement at the
inner list
vlan-tags inner list [ vlan-id vlan-id vlan-id ] outer <tpid.>vlan-id;
[edit interfaces ethernet-interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces ethernet-interface-name unit
logical-unit-number]
statement at the
[edit interfaces ethernet-interface-name]
flexible-vlan-tagging
[edit interfaces ethernet-interface-name]
flexible-vlan-tagging
option to specify the VLAN IDs as an inclusive range by
[edit interfaces ethernet-interface-name]
flexible-vlan-tagging
hierarchy
statement instead.
vlan-id-range
hierarchy
statement instead.
vlan-tags
hierarchy
statement instead.