Example: Configuring E1 Iq And Iqe Interfaces - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
This configuration creates interface
NOTE: Class-of-service (CoS) rules cannot be applied to an individual channel
configured on channelized IQ and IQE interfaces. You can only apply CoS rules to
the aggregate bit streams.
Configuring E1 IQ and IQE Interfaces
To configure an E1 interface on a Channelized STM1 IQ or IQE PIC, perform the
following tasks:
1.
2.
NOTE: Class-of-service (CoS) rules cannot be applied to an individual channel
configured on channelized IQ or IQE interfaces. You can only apply CoS rules to the
aggregate bit streams.
NOTE: For channelized STM1 interfaces, channel numbering begins with 0 (:0). For
channelized STM1 IQ and IQE interfaces, channel numbering begins with 1 (:1).

Example: Configuring E1 IQ and IQE Interfaces

Configure the following five E1 interfaces:
e1-0/0/0:1
e1-0/0/0:2
474
Configuring Channelized STM1 IQ and IQE Interfaces
no-partition interface-type so;
Include the no-partition
hierarchy level, specifying the
cstm1-fpc/pic/port]
converts the channelized STM1 interface into a channelized AU-4 interface. The
resulting interface name is
[edit interfaces cstm1-fpc/pic/port]
no-partition interface-type cau4;
Partition the channelized AU-4 interface into E1 interfaces by including the
partition and interface-type
hierarchy level, specifying the
interface e1-fpc/pic/port:channel
partition index and is correlated with the channel number. For channelized E1
interfaces, the partition number can be from 1 through 63. The interface type
is the channelized interface type or clear channel you are creating. For
channelized AU-4 interfaces,
[edit interfaces cau4-fpc/pic/port]
partition partition-number interface-type e1;
so-fpc/pic/port .
and interface-type statements at the
cau4-fpc/pic/port :
statements at the [edit interfaces cau4-fpc/pic/port]
interface type. This configuration creates
e1
. The partition number is the sublevel interface
can be or
type ce1 e1
[edit interfaces
interface type. This
cau4
.