Bert-Error-Rate; Bert-Period - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1000
bert-algorithm
—Pattern is 2
pseudo-2e17
—Pattern is 2
pseudo-2e18
pseudo-2e20-o151 —Pattern is 2
pseudo-2e20-o153 —Pattern is 2
pseudo-2e21 —Pattern is 2
pseudo-2e22 —Pattern is 2
—Pattern is 2
pseudo-2e23-o151
—Pattern is 2
pseudo-2e25
—Pattern is 2
pseudo-2e28
—Pattern is 2
pseudo-2e29
pseudo-2e31 —Pattern is 2
pseudo-2e32 —Pattern is 2
repeating-1-in-4 —One bit in four is set to 1; the others are set to 0.
—One bit in eight is set to 1; the others are set to 0.
repeating-1-in-8
repeating-3-in-24 —Three bits in twenty four are set to 1; the others are set to 0.
Default:
pseudo-2e3
Interface Diagnostics on page 146
Configuring E1 BERT Properties on page 562
Configuring E3 BERT Properties on page 570
Configuring T1 BERT Properties on page 578
Configuring T3 BERT Properties on page 588
Examples: Configuring T3 Interfaces on page 597
bert-error-rate on page 1001
bert-period on page 1002
17
– 1.
18
– 1.
20
– 1, as defined in the O151 standard.
20
– 1, as defined in the O153 standard.
21
– 1.
22
– 1.
23
– 1, as defined in the O151 standard.
25
– 1.
28
– 1.
29
– 1.
31
– 1.
32
– 1.