Example: Configuring Channelized Oc12 Interfaces With Partitioned Channels - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
(h)
For a full configuration example, see the JUNOS Feature Guide.

Example: Configuring Channelized OC12 Interfaces with Partitioned Channels

The following configuration is sufficient to get the channelized OC12 interface up
and running. The OC12 interface can be divided into 12 channels. DS3 channels can
use the following encapsulation types:
460
Example: Configuring Channelized OC12 Interfaces with Partitioned Channels
}
partition 1 - 10 interface-type t1; # t1-1/1/0:7:[1-10]
partition 2 interface-type ct1; # ct1-1/1/0:7:11
}
t1-1/1/0:7:1 {
description "(g) T1 interface configuration.";
t1-options {
t1-options-statements;
}
}
...
ct1-1/1/0:7:11 {
description "(g) CT1 to NxDSOs.";
t1-options {
t1-options-statements;
}
partition 1 timeslots 0 - 10 interface-type ds0; # ds-1/1/0:7:11:1
partition 2 timeslots 11- 23 interface-type ds0; # ds-1/1/0:7:11:2
...
}
coc1-1/1/0:8 {
description "(h) OC-slice 12 of coc12-1/1/0. COC12 to COC1 VT-mapped to CT1
to NxDS0s.";
sonet-options {
sonet-options-statements;
}
partition 1 interface-type t1; # ct1-1/1/0:8:1
}
ct1-1/1/0:8:1 {
description "(h) CT1 to NxDSOs.";
t1-options {
t1-options-statements;
}
partition 1 timeslots 0 - 10 interface-type ds0; # ds-1/1/0:8:1:1
partition 2 timeslots 11- 23 interface-type ds0; # ds-1/1/0:8:1:2
...
}
PPP, PPP CCC, and PPP TCC
Frame Relay, Frame Relay CCC, and Frame Relay TCC
Cisco HDLC, Cisco HDLC CCC, and Cisco HDLC TCC