Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 830

JUNOS 10.1 Network Interfaces Configuration Guide
Displaying ETH-DM Frame Counts for MEPs by Interface or Domain Level
Display ETH-DM frame counts for CFM maintenance association end points (MEPs).
Purpose
By default, the
displays CFM database information for MEPs attached to CFM-enabled Ethernet
interfaces on the router or at a maintenance domain level. For Ethernet interfaces
that support ETH-DM, any frame counts are also displayed when you specify the
detail
NOTE: At the router attached to the initiator MEP for a one-way session, or at the
router attached to the receiver MEP for a two-way session, you can only display
ETH-DM frame counts.
Action
Clearing ETH-DM Statistics and Frame Counts
Clear the ETH-DM statistics and ETH-DM frame counts.
Purpose
760
Displaying ETH-DM Frame Counts for MEPs by Interface or Domain Level
To display CFM database information (including ETH-DM frame counts) only for
local MEP in MA
201 ma1
user@host> show oam ethernet connectivity-fault-management mep-database
maintenance-domain md2 maintenance-association ma2 local-mep 201
To display CFM database information (including ETH-DM frame counts) only for
remote MEP 302 in MD md3
user@host> show oam ethernet connectivity-fault-management mep-database
maintenance-domain ma3 maintenance-association ma3 remote-mep 302
show oam ethernet connectivity-fault-management interfaces
or extensive command option.
To display CFM database information (including ETH-DM frame counts) for all
MEPs attached to CFM-enabled Ethernet interfaces on the router:
user@host> show oam ethernet connectivity-fault-management interfaces
detail
To display CFM database information (including ETH-DM frame counts) only for
the MEPs attached to CFM-enabled router interface
user@host> show oam ethernet connectivity-fault-management interfaces
ge-5/2/9.0 detail
To display CFM database information (including ETH-DM frame counts) only for
MEPs enclosed within CFM maintenance domains (MDs) at level
user@host> show oam ethernet connectivity-fault-management interfaces
level 6 detail
within MD :
md1
within MA ma3 :
command
ge-5/2/9.0 :
:
6