JUNOS 10.1 Network Interfaces Configuration Guide
Example: Configuring Untagged Aggregated Ethernet Interfaces
Configure an untagged aggregated Ethernet interface by omitting the
and
Configuring Aggregated Ethernet Link Speed
On aggregated Ethernet interfaces, you can set the required link speed for all
interfaces included in the bundle. All interfaces that make up a bundle must be the
same speed. If you include in the aggregated Ethernet interface an individual link
that has a speed different from the speed you specify in the
an error message will be logged.
To set the required link speed:
1.
2.
656
Configuring Aggregated Ethernet Link Speed
vlan-id
statements from the configuration:
[edit interfaces]
fe-5/0/1 {
fastether-options {
802.3ad ae0;
}
}
ae0 {
unit 0 {
family inet {
address 13.1.1.2/24 {
vrrp-group 0 {
virtual-address 13.1.1.4;
priority 200;
}
}
}
}
}
Specify that you want to configure the aggregated Ethernet options.
user@host# edit interfaces interface-name aggregated-ether-options
Configure the link speed.
[edit interfaces interface-name aggregated-ether-options ]
user@host# set link-speed speed
can be in bits per second either as a complete decimal number or as a
speed
decimal number followed by the abbreviation
(1,000,000,000).
g
Aggregated Ethernet interfaces on the M120 router can have one of the following
speed values:
vlan-tagging
parameter,
link-speed
(1000),
(1,000,000), or
k
m