Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1234

JUNOS 10.1 Network Interfaces Configuration Guide
ilmi
ilmi;
Syntax
[edit interfaces at-fpc/pic/port atm-options]
Hierarchy Level
Statement introduced before JUNOS Release 7.4.
Release Information
Enable the router to communicate with directly attached ATM switches and routers.
Description
The router uses the VC 0.16 to communicate with the ATM switch or router. Once
configured, you can display the IP address and port number of an ATM switch or
router using the
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1164
ilmi
show interfaces interface-name switch-id
Configuring Communication with Directly Attached ATM Switches and Routers
on page 299
show ilmi
show ilmi statistics
command.