Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 904

JUNOS 10.1 Network Interfaces Configuration Guide
Configuring the PPPoE Service Name
When configuring a PPPoE client, identify the type of service provided by the access
concentrator—such as the name of the Internet service provider (ISP), class, or quality
of service—by including the
You can include this statement at the following hierarchy levels:
Configuring the PPPoE Server Mode
When configuring a PPPoE server, identify the mode by including the
You can include this statement at the following hierarchy levels:
Configuring the PPPoE Client Mode
When configuring a PPPoE client, identify the mode by including the
You can include this statement at the following hierarchy levels:
Configuring the PPPoE Source and Destination Addresses
When configuring a PPPoE client or server, assign source and destination
addresses—for example,
and destination address, include the
You can include these statements at the following hierarchy levels:
834
Configuring PPPoE
service-name name;
[edit interfaces pp0 unit logical-unit-number pppoe-options]
[edit logical-systems logical-system-name interfaces pp0 unit logical-unit-number
pppoe-options]
server;
[edit interfaces pp0 unit logical-unit-number pppoe-options]
[edit logical-systems logical-system-name interfaces pp0 unit logical-unit-number
pppoe-options]
client;
[edit interfaces pp0 unit logical-unit-number pppoe-options]
[edit logical-systems logical-system-name interfaces pp0 unit logical-unit-number
pppoe-options]
192.168.1.1/32
address address {
destination address;
}
[edit interfaces pp0.0 family inet]
service-name statement:
and 192.168.1.2
and
address destination
statement:
server
client statement:
. To assign the source
statements: