Force - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

force

force (protect | working);
Syntax
[edit interfaces interface-name sonet-options aps]
Hierarchy Level
Statement introduced before JUNOS Release 7.4.
Release Information
Perform a forced switch between the protect and working circuits. This statement
Description
is honored only if there are no higher-priority reasons to switch. It can be overridden
by a signal failure on the protect circuit, thus causing a switch to the working circuit.
Options protect
working
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1132
force
—Request the circuit to become the protect circuit.
—Request the circuit to become the working circuit.
Configuring Switching Between the Working and Protect Circuits on page 919
request on page 1392