Cell-Bundle-Size - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

cell-bundle-size

cell-bundle-size cells;
Syntax
Hierarchy Level [edit interfaces at-fpc/pic/port atm-options],
[edit interfaces at-fpc/pic/port unit logical-unit-number],
[edit logical-systems logical-system-name interfaces at-fpc/pic/port unit
Statement introduced before JUNOS Release 7.4.
Release Information
For ATM2 IQ interfaces using ATM Layer 2 circuit cell-relay transport mode only,
Description
you can configure the maximum number of ATM cells per frame.
Options cells
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
logical-unit-number]
—Maximum number of cells.
Default: 1 cell
Range: 1 through 176 cells
Configuring the Layer 2 Circuit Cell-Relay Cell Maximum on page 321
Chapter 62: Summary of Interface Configuration Statements
cell-bundle-size
1019