Arp - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

arp

arp ip-address (mac | multicast-mac) mac-address <publish>;
Syntax
Hierarchy Level [edit interfaces interface-name unit logical-unit-number family inet address address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
Statement introduced before JUNOS Release 7.4.
Release Information
For Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces only, configure Address
Description
Resolution Protocol (ARP) table entries, mapping IP addresses to MAC addresses.
Options ip-address
mac mac-address
multicast-mac
publish
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
family inet address address]
—IP address to map to the MAC address. The IP address specified must be
part of the subnet defined in the enclosing
—MAC address to map to the IP address. Specify the MAC address
as six hexadecimal bytes in one of the following formats:
. For example,
nn:nn:nn:nn:nn:nn
—Multicast MAC address to map to the IP address. Specify the multicast
MAC address as six hexadecimal bytes in one of the following formats:
or
nnnn.nnnn.nnnn nn:nn:nn:nn:nn:nn
00:11:22:33:44:55 .
—(Optional) Have the router reply to ARP requests for the specified IP address.
If you omit this option, the router uses the entry to reach the destination but
does not reply to ARP requests.
Configuring Static ARP Table Entries on page 693
Chapter 62: Summary of Interface Configuration Statements
statement.
address
0011.2233.4455 or 00:11:22:33:44:55
. For example,
0011.2233.4455
or
nnnn.nnnn.nnnn
.
or
977
arp