Figure 44: Sample Channelization of OC12 IQE PIC
Example: Configuring NxDS0 Interfaces
Configure the following two NxDS0 interfaces with 10 time slots and 4 time slots,
respectively:
ds-0/0/0:1:2:1
ds-0/0/0:1:2:2
VT-Mapped
[edit interfaces coc12-0/0/0]
partition 1 oc-slice 1 interface-type coc1;
Configuration
[edit interfaces coc1-0/0/0:1]
partition 2 interface-type ct1;
[edit interfaces ct1-0/0/0:1:2]
partition 1 timeslots 1-10 interface-type ds;
partition 2 timeslots 12-16 interface-type ds;
[edit interfaces coc12-0/0/0]
M13 or C-bit
partition 1 oc-slice 1 interface-type coc1;
Parity-Mapped
Configuration
[edit interfaces coc1-0/0/0:1]
no-partition interface-type ct3;
[edit interfaces ct3-0/0/0:1]
partition 2 interface-type ct1;
[edit interfaces ct1-0/0/0:1:2]
partition 1 timeslots 1-10 interface-type ds;
partition 2 timeslots 12-16 interface-type ds;
For a full configuration example, see the JUNOS Feature Guide.
Chapter 19: Configuring Channelized OC12/STM4 Interfaces
Configuring Channelized OC12/STM4 IQ and IQE Interfaces (SONET Mode)
441