Dcd - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

dcd

dcd (ignore | normal | require);
Syntax
[edit interfaces interface-name serial-options dce-options],
Hierarchy Level
[edit interfaces interface-name serial-options dte-options]
Statement introduced before JUNOS Release 7.4.
Release Information
For EIA-530 and V.35 interfaces only, configure the from-DCE signal,
Description
data-carrier-detect (DCD).
Options ignore
normal
require
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1048
dcd
—The from-DCE signal is ignored.
—Normal DCD signal handling as defined by the TIA/EIA Standard 530.
—The from-DCE signal must be asserted.
Default:
normal
Configuring the Serial Signal Handling on page 278