Creating A Service Name Table - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
3.
4.
5.
6.

Creating a Service Name Table

You can create up to 16 PPPoE service name tables. You can optionally create services
and add them to a service name table. By default, the empty service is present in
each service name table and is associated with the terminate action. The empty
service is used when a PADI packet with a zero-length (or empty) service name tag
is received by the PPPoE server.
To create a service name table, specify the table name:
838
Creating a Service Name Table
See "Configuring the Action Taken When the Client Request Includes an Empty
Service Name Tag" on page 839.
Assign a service to the service name table and optionally configure the action
taken for the specified service name.
See "Assigning a Service to a Service Name Table and Configuring the Action
Taken When the Client Request Includes a Non-zero Service Name Tag" on
page 839.
(Optional) Configure the action taken for an ACI/ARI pair associated with a service.
See "Assigning an ACI/ARI Pair to a Service Name and Configuring the Action
Taken When the Client Request Includes ACI/ARI Information" on page 840.
Assign a service name table to a PPPoE underlying interface.
See "Assigning a Service Name Table to a PPPoE Underlying Interface" on
page 841.
(Optional) Configure trace options for troubleshooting the configuration.
See "Tracing PPPoE Operations" on page 844.
[edit protocols pppoe service-name-tables table1]
user@host# service-name-tables table1