Interface-Type - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

interface-type

interface-type (bc | coc1 | ct1 | ct3 | dc | ds |so | t1 | t3);
Syntax
[edit interfaces interface-name no-partition],
Hierarchy Level
[edit interfaces interface-name partition partition-number],
[edit interfaces interface-name partition partition-number oc-slice oc-slice-range],
[edit interfaces interface-name partition partition-number timeslot timeslot-range]
Statement introduced before JUNOS Release 7.4.
Release Information
For IQ and IQE interfaces only, configure the sublevel interface type.
Description
Options bc
coc1
ct1
ct3
dc
ds
so
t1
—Dual—Port Channelized E1 and T1 ISDN PRI interface type. You can specify this
interface type at the [edit interfaces interface-name partition partition-number
timeslot timeslot-range]
bc-pim/0/port:channel interface for each time you want to function as an ISDN
PRI B-channel.
—Channelized OC1 interface type. You can specify this interface type at the
[edit interfaces interface-name partition partition-number oc-slice oc-slice-range
interface-type coc12-fpc/pic/port]
—Channelized T1 interface type. You can specify this interface type at the
interfaces interface-name partition partition-number interface-type
ct3-fpc/pic/port<:channel>]
—Channelized T3 interface type. You can specify this interface type at the
interfaces interface-name partition partition-number oc-slice oc-slice-range
interface-type coc1-fpc/pic/port:channel no-partition]
—Dual-Port Channelized E1 and T1 ISDN PRI interface type. You can specify this
interface type at the [edit interfaces interface-name partition partition-number
timeslot timeslot-range]
control the B-channels.
—DS0 interface type. You can specify this interface type at the
interface-namepartition partition-number interface-type (ce1-fpc/pic/port |
ct1-fpc/pic/port<:channel>)]
—SONET/SDH interface type. You can specify this interface type at the
interfaces interface-name partition partition-number oc-slice oc-slice-range
interface-type coc12-fpc/pic/port]
—T1 interface type. You can specify this interface type at the
interface-name partition partition-number oc-slice oc-slice-range interface-type
(coc12-fpc/pic/port | coc1-fpc/pic/port)]
Chapter 62: Summary of Interface Configuration Statements
hierarchy level to create a bearer (B) channel
hierarchy level.
hierarchy level.
hierarchy level to create a (D) channel
hierarchy level.
hierarchy level.
hierarchy level.
[edit
[edit
hierarchy level.
to
dc-pim/0/port
[edit interfaces
[edit
[edit interfaces
1197
interface-type