Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1195

Statement introduced before JUNOS Release 7.4.
Release Information
Configure protocol family information for the logical interface.
Description
Options family
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
—Protocol family:
—Protocol-independent family used for Layer 2 packet filtering
any
bridge —(M Series and T Series routers only) Configure only when the physical
interface is configured with
interface is configured with
—Circuit cross-connect protocol suite
ccc
inet —Internet Protocol version 4 suite
—Internet Protocol version 6 suite
inet6
—International Organization for Standardization Open Systems Interconnection
iso
(ISO OSI) protocol suite
mlfr-end-to-end —Multilink Frame Relay FRF.15
—Multilink Frame Relay FRF.16
mlfr-uni-nni
multilink-ppp —Multilink Point-to-Point Protocol
—Multiprotocol Label Switching (MPLS)
mpls
tcc —Translational cross-connect protocol suite
—Trivial Network Protocol
tnp
—(M Series and T Series routers only) Virtual private LAN service
vpls
The remaining statements are explained separately.
Configuring the Protocol Family on page 184
Example: Configuring E-LINE and E-LAN Services for a PBB Network on MX series
Routers
JUNOS Services Interfaces Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
type encapsulation or when the logical
ethernet-bridge
vlan-bridge type encapsulation
1125
family