Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1181

}
lmi {
}
}
[edit protocols oam]
Hierarchy Level
Statement introduced in JUNOS Release 8.2.
Release Information
For Ethernet interfaces on M320, MX Series, and T Series routers, provide fault
Description
signaling and detection for 802.3ah Operation, Administration, and Management
(OAM) support.
The remaining statements are explained separately.
link-adjacency-loss;
link-event-rate {
frame-error count;
frame-period count;
frame-period-summary count;
symbol-period count;
}
protocol-down;
}
}
interface interface-name {
apply-action-profile;
link-discovery (active | passive);
pdu-interval interval;
pdu-threshold threshold-value;
remote-loopback;
event-thresholds {
frame-error count;
frame-period count;
frame-period-summary count;
symbol-period count;
}
negotiation-options {
allow-remote-loopback;
no-allow-link-events;
}
}
status-counter count;
polling-verification-timer value;
interface name {
uni-id uni-name;
status-counter number;
polling-verification-timer value;
evc-map-type (all-to-one-bundling | bundling | service-multiplexing);
evc evc-name {
default-evc;
vlan-list vlan-id-list;
}
}
Chapter 62: Summary of Interface Configuration Statements
1111
ethernet