Callback - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

callback

callback;
Syntax
[edit interfaces dln unit logical-unit-number dialer-options incoming-map],
Hierarchy Level
[edit logical-systems logical-system-name interfaces dln unit logical-unit-number
Statement introduced in JUNOS Release 7.5.
Release Information
On J Series Services Routers with interfaces configured for ISDN, configure the dialer
Description
to terminate the incoming call and call back the originator after the callback wait
period. The default wait time is 5 seconds. To configure the wait time, include the
callback-wait-period
dialer-options]
NOTE: The
incoming ISDN calls.
If the
at the
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
dialer-options incoming-map]
statement at the
hierarchy level.
incoming-map statement is mandatory for the router to accept any
statement is configured, you cannot use the
callback
[edit interfaces dln unit logical-unit-number dialer-options]
Configuring Dial-In and Callback on page 884
JUNOS Software Interfaces and Routing Configuration Guide
callback-wait-period on page 1014
Chapter 62: Summary of Interface Configuration Statements
[edit interfaces dl n unit logical-unit-number
caller caller-id
statement
hierarchy level.
1013
callback