Configuring An Aggregated Ethernet Interface - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

Network interfaces configuration
Table of Contents

Advertisement

rewrite operations on dual-tagged frames, which consist of the following configuration
statements:
In all cases, you must set the number of aggregated Ethernet interfaces on the chassis.
You can also set the link speed and the minimum links in a bundle.

Configuring an Aggregated Ethernet Interface

On Fast Ethernet, Tri-Rate Ethernet copper, Gigabit Ethernet, and 10-Gigabit Ethernet
interfaces on M Series and T Series routers, you can associate a physical interface
with an aggregated Ethernet interface.
To configure an aggregated Ethernet interface:
1.
2.
You specify the interface instance number
be from 0 through 127, for a total of 128 aggregated interfaces. You must also include
a statement defining
specify other physical properties that apply specifically to the aggregated Ethernet
interfaces; for details, see "Ethernet Interfaces Overview" on page 603, and for a
sample configuration, see "Example: Configuring Aggregated Ethernet Interfaces"
on page 866.
NOTE: In general, aggregated Ethernet bundles support the features available on all
supported interfaces that can become a member link within the bundle. As an
exception, Gigabit Ethernet IQ features and some newer Gigabit Ethernet features
are not supported in aggregated Ethernet bundles.
Gigabit Ethernet IQ and SFP interfaces can be member links, but IQ- and SFP-specific
features are not supported on the aggregated Ethernet bundle even if all the member
links individually support those features.
inner-tag-protocol-id
inner-vlan-id
pop-pop
pop-swap
push-push
swap-push
swap-swap
Specify that you want to configure the link aggregation group interface.
user@host# edit interfaces interface-name
Configure the aggregated Ethernet interface.
[edit interfaces interface-name]
user@host# set (fastether-options | gigether-options) 802.3ad aex
aex
at the
Chapter 35: Configuring Aggregated Ethernet Interfaces
to complete the link association;
x
[edit interfaces]
hierarchy level. You can optionally
Configuring an Aggregated Ethernet Interface
can
x
645

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos 10.1

Table of Contents