Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Action Parameters—These settings define the default log export settings for the
management system, and determine how the system handles qualified log entries
(log entries that match specified log criteria).
Device Log Action Criteria—The criteria specifies the category and severity of the log
entries you want to export. When a log entry meets the specified criteria, it is considered
qualified, and NSM performs the specified actions defined in the criteria.
Configuring Action Parameters
From the Action Manager, select Action Parameters to define the default log export
settings for the management system. To enable the management system to export
qualified logs to the system log, SNMP, CSV, XML or e-mail, configure the export settings
for each format as detailed in the following sections. For every log action criteria, you can
specify and edit multiple system log and SNMP servers with their respective system log
server facilities and SNMP communities.
Exporting to the System Log
For exporting to the system log, configure the IP address and the server facility for all of
mulitple syslog servers to which you want to send qualified logs. NSM uses the specified
server when exporting qualified log entries to the system log.
To actually export logs to a system log server, you must select "Syslog Enable" using the
Actions tab in the Device Log Action Criteria node.
Exporting to SNMP
For exporting to SNMP, configure the following SNMP settings:
SNMP Manager—Specify the IP addresses of the SNMP servers to which the GUI Server
sends SNMP traps.
SNMP Community—Specify SNMP community names that provide the desired
combination of both read and write access from the SNMP server.
NSM uses this information when exporting qualified log entries to SNMP. This setting
defines the SNMP settings for the management system. To actually export logs to the
specified SNMP servers and community, you must select "SNMP Enable" using the Actions
tab in the Device Log Action Criteria node.
NOTE: The NSM MIB files resides in the
management system. The file names are
Exporting to CSV
For exporting to CSV, configure the following CSV settings:
File Path—The directory and filename that you want log entries exported to in .CSV
format.
Print Header—When selected, column headers are exported to .CSV format.
/usr/netscreen/DvrSvr/utils
and
jnx.nsm-traps.mib
jnx-smi.mib
Chapter 18: Logging
directory on the
.
771
Advertisement
Table of Contents
