Acknowledge-Timer - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

acknowledge-timer

acknowledge-timer milliseconds;
Syntax
Hierarchy Level [edit interfaces interface-name mlfr-uni-nni-bundle-options]
Statement introduced before JUNOS Release 7.4.
Release Information
For link services and voice services interfaces only, configure the maximum time,
Description
in milliseconds, to wait for an add link acknowledgment, hello acknowledgment, or
remove link acknowledgment message.
milliseconds—Time, in milliseconds, to wait for an add link acknowledgment, hello
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
acknowledgment, or remove link acknowledgment message.
Range: 1 through 10 milliseconds
Default: 4 milliseconds
JUNOS Services Interfaces Configuration Guide
address on page 962, hello-timer on page 1147
hello-timer on page 1147
Chapter 62: Summary of Interface Configuration Statements
acknowledge-timer
953