Data-Input - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

data-input

data-input (system | interface interface-name);
Syntax
Hierarchy Level [edit interfaces ds-pim/0/port:channel]
Statement introduced in JUNOS Release 8.2.
Release Information
For interfaces operating on T1/E1 PIMs for J Series Services Routers only, configure
Description
whether an interface should send and receive data from the Routing Engine or from
a given interface name. On channelized T1/E1 interfaces partitioned into channels,
you can insert time slots from one port directly into the other port on the same PIM,
to replace time slots coming through the Routing Engine.
To avoid slips, both ports must use the same clock source: either the router s internal
clock or an external clock on one of the interfaces. If an external clock source is
required, one interface must specify clocking external and the other must specify
the same clock by including the
at the
Options system
interface interface-name
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
[edit interfaces interface-name]
—Interface sends and receives data from the Routing Engine.
—Interface sends and receives data from a specific interface.
Default: Data is sent and received from the Routing Engine (system).
Configuring a Channelized T1/E1 Interface to Drop and Insert Time Slots on
page 520
JUNOS Software Interfaces and Routing Configuration Guide
clocking on page 1026
Chapter 62: Summary of Interface Configuration Statements
clocking external interface interface-name
hierarchy level.
statement
1047
data-input