Backup-Interface - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

backup-interface

backup-interface es-fpc/pic/port;
Syntax
Hierarchy Level [edit interfaces es-fpc/pic/port es-options]
Statement introduced before JUNOS Release 7.4.
Release Information
Configure a backup ES Physical Interface Card (PIC). If the primary ES PIC fails, the
Description
backup becomes active, inherits all the tunnels and security associations (SAs), and
acts as the new next hop for IP Security (IPsec) traffic.
Options es-fpc/pic/port
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
backup-options
backup-options {
Syntax
}
[edit interfaces interface-name unit logical-unit-number],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Release Information
Configure an interface to be used as a backup interface if the primary interface goes
Description
down. This is used to support ISDN dial backup operation.
The remaining statement is explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
—Name of ES interface to serve as the backup.
JUNOS Services Interfaces Configuration Guide
interface interface-name;
Configuring an ISDN Dialer Interface as a Backup Interface on page 878
JUNOS Software Interfaces and Routing Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
backup-interface
993