Indication; Indication-Polarity - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

indication

indication (ignore | normal | require);
Syntax
[edit interfaces interface-name serial-options dce-options],
Hierarchy Level
[edit interfaces interface-name serial-options dte-options]
Statement introduced before JUNOS Release 7.4.
Release Information
For X.21 interfaces only, configure the from-DCE signal indication.
Description
Options ignore
normal
require
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

indication-polarity

indication-polarity (negative | positive);
Syntax
[edit interfaces interface-name serial-options]
Hierarchy Level
Statement introduced before JUNOS Release 7.4.
Release Information
For X.21 interfaces only, configure the indication signal polarity.
Description
positive
Options
negative
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1170
indication
—The from-DCE signal is ignored.
—Normal indication signal handling as defined by ITU-T Recommendation X.21.
—The from-DCE signal must be asserted.
Default:
normal
Configuring the Serial Signal Handling on page 278
—Positive signal polarity.
—Negative signal polarity.
Default:
positive
Configuring Serial Signal Polarities on page 281