Crc-Minor-Alarm-Threshold - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

crc-minor-alarm-threshold

crc-minor-alarm-threshold (1e-3 | 5e-4 | 1e-4 | 5e-5 | 1e-5 | 5e-6 | 1e-6);
Syntax
[edit interfaces interface-name t1-options]
Hierarchy Level
Statement introduced in JUNOS Release 8.5.
Release Information
Minor alarm error thresholds for T1 CRC errors. When the threshold is exceeded for
Description
one second, a defect condition is declared. If the defect condition continues for the
monitoring period, an alarm condition is declared.
10-second monitoring period for values
Default
uses a 50-second monitoring period. The
period. The
rate
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
value uses a 500-second monitoring period.
1e-6
—Error rate expressed as the number of errors per number of bits. The value
–3
is one error in 10
1e-3
Default: 5e-6
Configuring T1 CRC Error Minor Alarm Thresholds on page 580
Chapter 62: Summary of Interface Configuration Statements
, ,
1e-3 5e-4 1e-4
5e-6 value uses a 100-second monitoring
bits and is five errors in 10
5e-4
crc-minor-alarm-threshold
, and . The value
5e-5 1e-5
–4
bits.
1043