JUNOS 10.1 Network Interfaces Configuration Guide
In Figure 60 on page 696, the edge device is not running any IP protocols. In this case,
you configure the core router to perform unrestricted proxy ARP. The edge device
is the client of the proxy.
In Figure 61 on page 696, the Broadcast Remote Access Server (B-RAS) routers are
not running any IP protocols. In this case, you configure unrestricted proxy ARP on
the B-RAS interfaces. This allows the core device to behave as though it is directly
connected to the end users.
Figure 60: Edge Device Case for Unrestricted Proxy ARP
Figure 61: Core Device Case for Unrestricted Proxy ARP
Configuring Unrestricted Proxy ARP
To configure unrestricted proxy ARP, include the
You can include this statement at the following hierarchy levels:
696
Configuring Unrestricted Proxy ARP
proxy-arp;
[edit interfaces interface-name unit logical-unit-number ]
statement:
proxy-arp