Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 794

JUNOS 10.1 Network Interfaces Configuration Guide
Table 68: Type Field Values for Various TLVs for CFM PDUs (continued)
TLV or Organization
Port Status TLV
Data TLV
Interface Status TLV
Reply Ingress TLV
Reply Egress TLV
LTM Egress Identifier TLV
LTR Egress Identifier TLV
Reserved for IEEE 802.1
Organization-Specific TLV
Defined by ITU-T Y.1731
Reserved for IEEE 802.1
Not every TLV is applicable for all types of CFM PDUs.
724
Configuring Port Status TLV and Interface Status TLV
TLVs applicable for continuity check message (CCM):
End TLV
Sender ID TLV
Port Status TLV
Interface Status TLV
Organization-Specific TLV
TLVs applicable for loopback message (LBM):
End TLV
Sender ID TLV
Data TLV
Organization-Specific TLV
TLVs applicable for loopback reply (LBR):
End TLV
Sender ID TLV
Data TLV
Organization-Specific TLV
Type Field
2
3
4
5
6
7
8
9 to 30
31
32 to 63
64 to 255