Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1071

bert-error-rate
bert-error-rate rate;
Syntax
Hierarchy Level [edit interfaces ce1-fpc/pic/port],
[edit interfaces ct1-fpc/pic/port],
[edit interfaces interface-name ds0-options],
[edit interfaces interface-name e1-options],
[edit interfaces interface-name e3-options],
[edit interfaces interface-name t1-options],
[edit interfaces interface-name t3-options]
Statement introduced before JUNOS Release 7.4.
Release Information
Configure the bit error rate to use in a BERT procedure. Applies to E1, E3, T1, or T3
Description
interfaces, and to the channelized interfaces (DS3, OC3, OC12, and STM1).
NOTE: When configuring CE1 or CT1 interfaces on 10-port Channelized E1/T1 IQE
PICs, the
ce1-fpc/pic/port]
Options rate
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
bert-error-rate statement must be included at the
or
[edit interfaces ct1-fpc/pic/port]
—Bit error rate.
Range: 0 through 7, which corresponds to 10
per 10 million bits)
Default: 0
Interface Diagnostics on page 146
Configuring E1 BERT Properties on page 562
Configuring E3 BERT Properties on page 570
Configuring T1 BERT Properties on page 578
Configuring T3 BERT Properties on page 588
Examples: Configuring T3 Interfaces on page 597
bert-algorithm on page 999
bert-period on page 1002
Chapter 62: Summary of Interface Configuration Statements
[edit interfaces
hierarchy level as appropriate.
–1
(1 error per bit) to 10
–7
(1 error
1001
bert-error-rate