Aps - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

aps

aps {
Syntax
}
[edit interfaces interface-name sonet-options]
Hierarchy Level
Statement introduced before JUNOS Release 7.4.
Release Information
Configure Automatic Protection Switching (APS) on the router.
Description
For DS3 channels on a channelized OC12 interface, configure APS on channel 0 only.
If you configure APS on channels 1 through 11, it is ignored.
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
976
aps
advertise-interval milliseconds;
annex-b
authentication-key key;
force;
hold-time milliseconds;
lockout;
neighbor address;
paired-group group-name;
preserve-interface;
protect-circuit group-name;
request;
revert-time seconds;
switching-mode (bidirectional | unidirectional);
working-circuit group-name;
Configuring APS and MSP on page 911