Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 587

The above configuration results in the following interfaces:
The remaining ports (other than 0 and 4) remain as regular E1 interfaces (and follow
the
Use Time Slots
1 Through 10
Use Time Slots
1 Through 5, 10, and 24
}
e1 4 {
channel-group 10 timeslots 11,17,28-31;
}
}
}
}
[edit interfaces ds-0/1/0:0]
e1-options {
fcs 32;
framing g704-non-grc;
loopback remote;
}
[edit interfaces ds-0/1/4:10]
ds0-options {
byte-encoding nx56;
start-end-flag filler;
}
ds-0/1/0:1, with time slot 1 allocated
ds-0/1/0:5, with time slots 5 through 7 allocated
ds-0/1/4:10, with time slots 11, 17, and 28 through 31 allocated
naming convention).
e1-0/1/x
[edit chassis]
fpc 0 {
pic 1 {
ce1 {
e1 0 {
channel-group 1 timeslots 1;
channel-group 5 timeslots 5-7;
}
e1 4 {
channel-group 10 timeslots 11,17, 28-31;
}
}
}
}
[edit chassis fpc slot-number pic pic-number ce1 e1 link-number]
channel-group group-number;
timeslots 1-10;
[edit chassis fpc slot-number pic pic-number ce1 e1 link-number]
channel-group group-number;
timeslots 1-5,10,24;
Chapter 24: Configuring Channelized E1 Interfaces
Example: Configuring Channelized E1 Interfaces
517