Ima-Link-Options - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
transmit-clock (common |independent)
version (1.0 |1.1)
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

ima-link-options

Syntax ima-link-options group g
Hierarchy Level [edit interfaces (t1-fpc/pic/port:m:n | e1-fpc/pic/port:n | t1|e1-fpc/pic/port)]
Statement introduced in JUNOS Release 10.0.
Release Information
Specify an interface as a member of an IMA group.
Description
group g
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1166
ima-link-options
—Start IMA group test.
ima-test-start
ima-test-stop —Stop IMA group test.
interface name —Interface name of the IMA link to test.
—IMA test pattern, default is 170.
pattern 1 254
—Length of IMA pattern test in seconds, the default is 10.
period 1-4294967294
common.
—IMA specification version.
ATM Support on Circuit Emulation PICs Overview on page 539
ima-link-options on page 1166
—Implying at-x/y/g .
ATM Support on Circuit Emulation PICs Overview on page 539
ima-group-options on page 1165
—Transmit clock configuration; the default is